Thursday, June 24, 2021

MFT - COLOR CHALLANGE #168

Hello, crafty friends! I'm back with the latest MFT Color Challenge #168. 

My card inspired by the challenge:  



To begin, I Copic colored the stamped images from the Magnolia Blossoms stamp set and die-cut them with the coordinating Die-namics.

For the front panel, I used trimmed Ken Oliver Watercolor paper and created a watercolor background with Prickly Pear Premium Dye Ink diluted with water. After, I added splatters of Milk Chocolate Premium Dye Ink diluted with water. 

The sentiment from the Magnolia Blossoms was stamped on the front panel with the Milk Chocolate Premium Dye Ink.

To finish, I foam-mounted the colored flowers to the front panel as shown.





I hope you enjoyed seeing my card.

For more inspiration from the design team head on over to the MFT Blog. You can link your project there for your chance to win a $50 Gift Voucher. 

Thank you for visiting me! Have a great day and happy stamping!


Wednesday, June 23, 2021

MFT - WEDNESDAY SKETCH CHALLENGE #547

  Hello, crafty friends! I'm back with the latest MFT Wednesday Sketch Challenge. 

My card inspired by the challenge:



To begin, I Copic colored the stamped images from the BB Green Pastures and the BB The Whole Herd stamp sets and die-cut with the coordinating Die-namics. 

The front panel was stamped with images from the BB The Whole Herd stamp set to create a pattern background.

The sentiments from the Little Love Notes stamp set were stamped on kraft cardstock. After, I die-cut with the Little Notes Sentiment Die-namics. 

To assemble the card. I adhered to a trimmed kraft cardstock to match the sketch with the sentiment to the front panel. To finish, I foam-mounted the colored images to the card front as shown.


I hope you enjoyed seeing my card.

For more inspiration from the design team head on over to the MFT Blog. You can link your project there for your chance to win a $50 Gift Voucher. 

Thank you for visiting me! Have a great day and happy stamping!



Tuesday, June 22, 2021

MFT - JUNE VAULT RELEASE DAY

 Hello and welcome MFT Vault Release Day! The amazing release is now available at the MFT Shop.

My box card today features the adorable BB Penguins in Paradise set.

To begin, I Copic colored the stamped images from the BB Penguins in Paradise stamp set and die-cut them with the coordinating die-namics.

The box card was die-cut using the Outside the Box Level Up Die-namic using SmoothWhite and Sno Cone Cardstocks. The front stitched panel and the side panels were ink blended with Summer Splash Premium Dye Ink. 

The sentiment from the BB Penguins in Paradise stamp set was heat embossed in white on the front stitched panel.

The sand panels were die-cut using the Outside the Box Snow Drifts Die-namics using kraft cardstock. The wave panel was die-cut using a die from the Outside the Waves Die-namics with Sno Cone Cardstock that I ink blended with Summer Splash Premium Dye Ink.

The box card was assembled as shown and I adhered the wave panel and the sand panels. To finish, I adhered the colored images to the box card to create my scene.


That's it for today. I hope you enjoyed seeing my card.



Tuesday, June 8, 2021

MFT & FRIENDS / JUNE RELEASE

  Hello and welcome to the MFT & Friends featuring the amazing June release products that are now available for purchase at the MFT Shop.

My card today highlights the new Beach Bears set and the Slimline Stitched Square Trio Die-namics.


To begin, I Copic colored the stamped images from the Beach Bear stamp set and die-cut them with the coordinating Die-namics.

The front panel was die-cut with the rectangle die from the Slimline Starter Die-namics and then die-cut with the Slimline Stitched Square Trio Die-namics using Sno Cone cardstock. After, I stamped the sentiment from the Beach Bear stamp set.

The sand drift panels were die-cut using a die from the Stitched Snow Drifts Die-namics using kraft cardstock. After, I added white and brown dots and trimmed them to fit inside the squares.

The clouds were ink blended on the background panel using the Micro Cloud Edges with Sno Cone Premium Dye Ink.

To assembled the card, I foam mounted the front panel to the background panel and adhered the sand drift panels inside the square. To finish, I foam-mounted the color images to create my scenes as shown.




That's it for today. Thank you so much for joining me during the MFT June Release Countdown. I hope you enjoyed seeing my projects.

Be sure to check out the MFT Blog to see the amazing projects made by the design team and the friends using the new release! And don't forget to leave a comment on each participating blog for a chance to win one of two $100 MFT gift vouchers!

Sunday, June 6, 2021

MFT / JUNE RELEASE COUNTDOWN DAY 2

  Hello and welcome to the MFT June Release Countdown! There are only 2 days left before the amazing new products will be available on Tuesday, June 8th at 10AM EDT. Make sure to stop by the MFT Blog every day during the countdown to see the full reveal.

My box card features the adorable You Keep Me Afloat set and the Wavy Lines Stencil from the new release.


To begin, I Copic colored the stamped images from the You Keep Me Afloat stamp set and die-cut them with the coordinating Die-namics.

The box card was made using the Outside the Box Die-namics. I ink blended the bottom of the box panels using Wavy Lines Stencil on Snow Cone Card Stock with Summer Splash Premium Dye Ink. The back panel was ink blended using the Mini Cloud Stencil with Sno Cone Premium Dye Ink. After, I assembled the box card as shown.

The wave insert panels were die-cut using the Outside the Box Waves Die-namics using the Sno Cone Cardstock and ink blended with Summer Splash Premium Dye Ink. After, I adhered the panels to the box card.

The sentiment from the You Keep Me Afloat was stamped and trimmed to fit the box.

To finish, I adhered the sentiment and the colored images to the box card to create my scene.



That's it for today. I hope you enjoyed my project

Friday, June 4, 2021

MFT / JUNE RELEASE COUNTDOWN DAY 4

   Hello and welcome to the MFT June Release Countdown! There are four days left before the amazing new products will be available on Tuesday, June 8th at 10AM EDT. Make sure to stop by the MFT Blog every day during the countdown to see the full reveal.

My card features the RAM Tweetheart stamp set.


To begin, I Copic colored the stamped images from the RAM Tweetheart stamp set and die-cut them with the coordinating Die-namics.

The tags were die-cut using the Trendy Tag Die-namics. The front tag was ink blended with Cotton Candy Premium Dye Ink. After, I stamped the sentiment from the RAM Tweetheart. 

For the front panel, I trimmed a pattern paper from the Woodgrain Whimsy Paper and adhered it to the top folding card base.

To assemble the card, I adhered the two tags together and tied them with twine. After, I foam mounted it to the front panel. To finish, I foam-mounted the colored images to the tag as shown. 



That's it for today. I hope you enjoyed my project. See you again tomorrow for my Countdown Day 3 project.

Thursday, June 3, 2021

MFT / JUNE RELEASE COUNTDOWN DAY 5

 Hello and welcome to the MFT June Release Countdown Kickoff! All of the amazing new products will be available on Tuesday, June 8th at 10AM EDT. Make sure to stop by the MFT Blog every day for the next five days to see the full reveal.

My card today features the adorable TI Let Your Hair Down stamp set.



To begin, I Copic colored the stamped images from the TI Let Your Hair Down Stamp set and die-cut them with the coordinating Die-namics. 

The front panel and the frame were die-cut with a die from the Stitched Rectangle Frames and ink blended the panel with the Summer Splash Premium Dye Ink. After, I added splatters of the same ink diluted with water on the panel. 

The grass panel was trimmed and die-cut using the Slimline Grassy Hills Die-namics and Sour Apple Card Stock. After, I stamped the sentiment from the TI Let Your Hair Down stamp set.

To assemble the card, I adhered the front panel and foam-mounted the rectangle frame to a top folding card base. To finish, I foam mounted the grass panel and the colored images to the front panel as shown.


That's it for today. See you again tomorrow for my June Release Countdown Day 4 project.